I wanted an improvement over my factory headlights so I have installed a
Traxide headlight upgrade kit - specifically for the D110,
works a treat and no more worries about burning out the instrument stalks as there is less current going through the switch.
My lights are definitely brighter and the voltage drop is now minimum from the battery.
I positioned my relays behind the passenger side headlight - working in that area is a bit tight but all worked out fine:
Ran the cable through split tube from the drivers light over to the relay and cable tied to the AC frame:
Connected all cables and then coated all exposed wiring:
Loacted the circuit breaker and connected it all up to the main battery:
Back to the D110 details