LRHybrid100 Website

Diary of 300 TDI install into the Range Rover - Updated 02.05.2005

Day 20 Wiring

So far so good - up to now most sensor wires have been the same colour on the Disco as that used on the RR V8.

I intend to rebuild the loom, once everything is working correctly then cover all wiring in the plastic loom protector.

I wanted to use the later style brake pad retaining pins (ones with springs on the pins) in a hope to keep the brake pads from "singing".

So I drilled out the older style holes on the callipers and will install new pins with the new EBS brake pads.

Email: LRHybrid100@hotmail.com