Diary of 300 TDI install into the Range Rover - Updated 02.06.2005
Day 23 Front Hub breathers and speedo driver
I did not want to use the ABS system from the donor Disco so I removed the ABS sensors and
had a plate made a plate to cover the sensor hole and also allow the install of a breather.
The breather is then taped into the cover plate and breather lines extended into the engine bay.
Here you can see the different speedo drivers - left one is the RR cable speedo driver and
the right one is the Disco electronic speedo driver. As both in this case had 23 splines
they were interchangable and the cable speedo reconnected to the Disco transfer gearbox.