CATTLE FEEDERS

by...BROWNS SHEET METAL

Makers of Reliable Rural Products...

" Browns Sheet Metal are Feeder Specialists"

Browns Sheet Metal

15 Pinn Street St. Marys

South Australia 5042.

 

Phone 08 8276 2728 

FAX 08 8276 9722

E:mail........ bsm@adelaide.on.net

ASK AT YOUR LOCAL RURAL MERCHANT ABOUT THE RANGE OF

RELIABLE RURAL PRODUCTS made by Browns Sheet Metal

or Phone , Fax , or E-Mail Today for further infomation
100 Bushel Grain & Pellets Cattle Feeder

Specifications:

CAPACITY:        100 bushels 

HOPPER LENGTH:    2350 mm 

OVERALL LENGTH:  2800 mm 

OVERALL HEIGHT:   2000 mm 

OVERALL WIDTH:    1500 mm 

TOTAL FEED TROUGH: 4700mm

  • This Cattle Feeder is designed to feed both whole grains as well as crushed grains.
  • Constructed from heavy gauge galvanized sheet steel.
  • Bolted construction giving greater strength.
  • Cattle may feed from both side troughs.
  • Easily adjusted feed control panels are laterally hinged and interlocked to allow free flow of feed.
  • The chance of bridging  is reduced by animal contact with the feed control panel.
  • The " Glide Away " lid assembly provides for easy filling by either auger, bucket, bag or other means. The lid can not blow open and is fully water proof when closed.
  • The feeder is mounted on a steel skid base frame assembly, and towing and lifting loops are fitted.
  • The double sided feed trough is an integral part of the overall feeder and frame construction,  allowing positive operation even when sited on uneven ground.
  • Can be lifted by fork or crane type assistant

Cattle Feeder ..........Hammer Milled Hay...

 

Specifications://

CAPACITY:       100 Bushels 

HOPPER LENGTH:   2350 mm 

OVERALL LENGTH: 2800 mm 

OVERALL HEIGHT:  2000 mm 

OVERALL WIDTH:   1500 mm 

TOTAL FEED TROUGH: 4700mm
This Cattle Feeder is designed to feed hammered hay mixed with a low percentage of grain

  • Constructed from heavy gauge galvanized sheet steel
  • Bolted construction giving greater strength.
  • Cattle may feed from both side troughs.
  • Mesh feed panels are laterally hinged and interlocked to allow stock to feed from either the trough or the feed panel.
  • The chance of bridging is reduced by animal contact with the feed control panel.
  • The " Glide Away " lid assembly provides for easy filling by either auger, bucket, bag or other means. The lid can not blow open and is fully water-proof when closed.
  • The feeder is mounted on a steel skid base frame assembly, and towing and lifting loops are fitted.
  • The double sided feed trough is an integral part of the overall feeder and frame construction,  allowing positive operation even when sited on uneven ground.
  • Can be lifted by fork or crane type assistant.

Browns Sheet Metal
Home Page

Stock Feeding Trailers

Sheep Feeders

Troughing

Foot Baths

Fire Tanks
July 09