Cattle Feeder....... 100 Bushel Hammer Milled Hay

Specifications:... CAPACITY:       100 Bushels  HOPPER LENGTH:   2350 mm  OVERALL LENGTH: 2800 mm  OVERALL HEIGHT:  2000 mm  OVERALL WIDTH:   1500 mm  TOTAL FEED TROUGH: 4700mm

This Cattle Feeder is designed to feed hammered hay mixed with a low percentage of grain

• Constructed from heavy gauge galvanized sheet steel
• Bolted construction giving greater strength.
• Cattle may feed from both side troughs.
• Mesh feed panels are laterally hinged and interlocked to allow stock to feed from either the trough or the feed panel.
• The chance of bridging is reduced by animal contact with the feed control panel.
• The " Glide Away " lid assembly provides for easy filling by either auger, bucket, bag or other means. The lid can not blow open and is fully water-proof when closed.
• The feeder is mounted on a steel skid base frame assembly, and towing and lifting loops are fitted.
• The double sided feed trough is an integral part of the overall feeder and frame construction,  allowing positive operation even when sited on uneven ground.
• Can be lifted by fork or crane type assistant.

Browns Sheet Metal Home Page

Stock Feeding Trailers

Sheep Feeders

Troughing

Foot Baths

Fire Tanks

July 09