Sheep Feeders..

by...BROWNS SHEET METAL

Makers of Reliable Rural Products...

Browns Sheet Metal 15 Pinn Street St. Marys South Australia 5042.

Phone 08 8276 2728    E:mail........ bsm@adelaide.on.net

SHEEP FEEDERS

• 60 Bushel Grain Feeder
• 29 & 39 Bushel Grain Feeders
• 29 & 39 Bushel Hammer Milled Hay Feederso ON Spring Specials

60 Bushel Grain Mobile Sheep made by Browns Sheet Metal

Specifications of Sheep Feeders Capacity 60 Bushels Length    2940 mm. Width      1100 mm Height     1720 mm Total Trough length 4700 mm This Feeder is supplied complete with removable verandahs

 

• This product is available as a mobile unit, or with Skid Base frame, and is designed to feed whole or crushed grain.
• The double sided feed trough assembly is a fixed integral part of the feeder design and allows the feeder to function  efficiently even when sited on uneven ground.
• Feed control will not mal-function by animal contact
• The trough features "anti-rake" front edge.
• Feed control panels are easily adjusted from the front of the feeder.
• The easy to use, fully waterproof, "glide-away" lid, ensures safety when used in windy conditions.
• Very suitable to stud stock and control of fat score.
• Also suited to goats ,alpaca, calves and deer.
• More Capacity for your Dollar. just divide the cost by the bushels and compare.

Can be lifted by fork or crane type assistant.

Specifications of feeders CAPACITY  29 bushels 39 bushel  HOPPER LENGTH: 1750 mm 2350 mm OVERALL LENGTH: 1800 mm 2400 mm OVERALL HEIGHT: 1000 mm 1000 mm OVERALL WIDTH. 900 mm 900 mm TOTAL FEED TROUGH- 3500 mm 4700 mm

• These feeders are designed to dispense whole grain as well as crushed grain of various types.
• The double sided feed trough assembly is a fixed and integral part of the feeder design and allows the feeder to function even when sited on unlevelled ground.
• Feed control will not mal-function by animal contact
• Trough features an "anti-rake" front edge.
• Feed control panels are easily adjusted from the front of the feeder
• The easy to use, fully waterproof, "glide-away" lid ensures safety when used in windy conditions.
• Feeders are fitted with timber skids and are easily lifted with hay fork or other means.
• Very suitable to stud stock and control of fat score.
• Suited to goats , alpaca and calves
• Can be lifted by fork or crane type assistant
• More Capacity for your Dollar, just divide the cost by the bushels and compare.

• These feeders are designed by Browns Sheet Metal to feed hammered hay mixed with a low percent of grain.
• Stock may feed from both side troughs.
• Mesh feed panels are laterally hinged and interlocked to allow stock to feed from either the trough or the feed panel face.
• The chance of bridging is reduced by animal contact with the feed panel
• The "Glide Away " lid assembly provides for easy filling by either auger, bucket, bag or other means. The lid can not blow open and is fully water proof when closed.
• The feeder is mounted on wooden skids
• The double sided feed trough is an integral part of the overall feeder design allowing positive operation even when sited on uneven ground.
• Trough features an "anti-rake" front edge.
• Can be lifted by fork or crane type assistant.
• Suited to goats, alpaca and calves.
  
• Season Specials

Browns Sheet Metal Home Page

Stock Feeding Trailers

Sheep Feeders

Troughing

Foot Baths

Fire Tanks