| Step 1: | Open the lid of the console box, lift up the carpet on the bottom and undo the screw. | |
| (Note the cloth tab I have glued to the bottom of the carpet to make this easier in the future) |
| Step 2: | Lift the console box to access the bolt underneath. | |
| Step 3: | Remove the bolt. |
| Step 4: | Remove the four screws (two either side) holding the heater/radio console. |
| Step 5: | Slide the main console towards the rear as far as you can to disengage the hook under the heater console. |
| Step 6: | Remove the heater/radio console, disconnecting the radio wiring as you go. |
| Step 7: | Reassemble everything in reverse order. |