smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: ST313021A Serial Number: 6CT0C4JE Firmware Version: 3.03 Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 5 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Sep 09 07:32:53 2007 AUS Eastern Standard Time SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (2400) seconds. Offline data collection capabilities: (0x1d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 14) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0008 079 078 000 Old_age Offline - 122927758 3 Spin_Up_Time 0x0006 098 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0013 096 096 020 Pre-fail Always - 4421 5 Reallocated_Sector_Ct 0x0013 098 098 036 Pre-fail Always - 120 7 Seek_Error_Rate 0x0009 053 038 030 Pre-fail Offline - 238545761 9 Power_On_Hours 0x0012 237 001 000 Old_age Always - 10013 10 Spin_Retry_Count 0x0013 100 100 090 Pre-fail Always - 0 12 Power_Cycle_Count 0x0013 096 096 000 Pre-fail Always - 4970 197 Current_Pending_Sector 0x0030 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 145 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Timestamp = decimal seconds since the previous disk power-on. Note: timestamp "wraps" after 2^32 msec = 49.710 days. Error 145 occurred at disk power-on lifetime: 9941 hours When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 df 21 2b 3d e0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- 40 d0 00 00 2a 3d e0 00 13985.421 READ VERIFY SECTOR(S) 40 d0 00 00 29 3d e0 00 13985.416 READ VERIFY SECTOR(S) 40 d0 00 00 28 3d e0 00 13985.411 READ VERIFY SECTOR(S) 40 d0 00 00 27 3d e0 00 13985.404 READ VERIFY SECTOR(S) 40 d0 00 00 26 3d e0 00 13985.399 READ VERIFY SECTOR(S) Error 144 occurred at disk power-on lifetime: 9923 hours When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 76 21 2b 3d 40 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- 40 d0 ff 99 29 3d 40 00 22797.502 READ VERIFY SECTOR(S) 40 d0 ff 9a 28 3d 40 00 22797.497 READ VERIFY SECTOR(S) 40 d0 ff 9b 27 3d 40 00 22797.490 READ VERIFY SECTOR(S) 40 d0 ff 9c 26 3d 40 00 22797.485 READ VERIFY SECTOR(S) 40 d0 ff 9d 25 3d 40 00 22797.479 READ VERIFY SECTOR(S) Error 143 occurred at disk power-on lifetime: 9881 hours When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 66 70 04 e0 Error: UNC at LBA = 0x00047066 = 290918 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c4 00 01 66 70 04 e0 00 251.140 READ MULTIPLE c6 00 01 01 00 00 ef 00 251.136 SET MULTIPLE MODE 91 00 01 01 00 00 ef 00 251.136 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 01 01 00 00 e1 00 251.136 RECALIBRATE [OBS-4] 00 00 01 00 00 00 00 04 250.953 NOP [Abort queued commands] Error 142 occurred at disk power-on lifetime: 9881 hours When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 66 70 04 e0 Error: UNC at LBA = 0x00047066 = 290918 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c4 00 01 66 70 04 e0 00 247.577 READ MULTIPLE c6 00 08 01 00 00 ef 00 247.574 SET MULTIPLE MODE 91 00 08 01 00 00 ef 00 247.574 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 08 01 00 00 e1 00 247.574 RECALIBRATE [OBS-4] 00 00 08 00 00 00 00 04 247.391 NOP [Abort queued commands] Error 141 occurred at disk power-on lifetime: 9881 hours When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 07 67 70 04 e0 Error: UNC at LBA = 0x00047067 = 290919 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c4 00 08 66 70 04 e0 00 244.025 READ MULTIPLE c6 00 08 01 00 00 ef 00 244.022 SET MULTIPLE MODE 91 00 08 01 00 00 ef 00 244.022 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 08 01 00 00 e1 00 244.021 RECALIBRATE [OBS-4] 00 00 08 00 00 00 00 04 243.839 NOP [Abort queued commands] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9941 - # 2 Short offline Completed without error 00% 9923 - # 3 Short offline Completed without error 00% 9923 - # 4 Short offline Completed without error 00% 9923 - # 5 Short offline Completed without error 00% 8885 -