NOTE 1 - This was attempt at build number four, or there abouts. The design you can download, has improvements to the design of the hull shape. This will make it easier to cover the hull, and give a smoother shape.
NOTE 2 - The large spines that extend from the wheels on the illustration, (one of Rodney's signatures), are included in the parts. I left them off my model,... 'cause I'm a bit clumsy.
NOTE 3 - The Printed Parts PDF, doesn't include page 17. There is no, and never was, a page 17. The reason being... I'm not very good at counting.... Yes it was just a simple counting stuff up!
NOTE 4 -
A major ERROR with the Download Files prior to 10-April-08.
Anyone who has downloaded the PDF's prior to 10-April-08 has incorrectly sized files. Due to unrealized problems, when I combined my single PDF pages, the combined file changed the page size. Please, please, please, don't use these PDFs.
You can follow the build thread of my model on the Card Modelling forum at
Please note that you will have to register to follow the whole thread. The upside is, registration is quick and easy.
These are the corrected files as of 10-April-08
Download the
INSTRUCTIONS
( password is voyager )
Download the
PRINTED PARTS
( password is voyager )
Download the
PRINTED PARTS REVERSE SIDE
( password is voyager )
( These pages are printed to be printed on the reverse side of the Printed Parts pages )
Any questions, comments, thoughts, may be directed to