Surprising enough after count-less experiments with panel sizes it became clear that the best ratios for the curved panel enclosure was still the application of the golden ratio. Therefore if you were to average out the curved enclosure dimensions it would approximate the golden ratio.

The drivers are mounted with imbedded tee nuts and high-grade anodized stainless steel bolts, which allow high torque loads on the bolts during assembly. This method of assembly transfers any out of phase energy from the drivers and into the enclosure mass which inturn transfers energy in to the intergraded stands. The drivers have also been positioned on the front panel off centre reducing panel resonance, the net result is a tighter bass response and more mid range and top end information.