Our Solar Installation.
A roof tile was raised and the stainless steel bracket was screwed to a roof beam.
Once the brackets are in place the tiles are returned to their original position. The roof is still safe from rain
Next an Aluminium beam is bolted across the brackets.
The panels are positioned centrally over the cross beams and .
Secured to the cross beams by a bracket.
Lastly the panels were joined together, to make 2 series of 5 panels.
The inverter was located next to the power meter.
The finished installation.
We use Skype! to chat to our friends. After install search for and call "micknjanet" in Adelaide.