Rick's Project - SCR-399

                                           rickshearman@bigpond.com       

Technician = Andrew VK5WT  +61  422  574 723      tosty@internode.on.net

         Project HQ is inAdelaide South Australiaaussieroo.gif (24124 bytes)

         6x6-scr-299.jpg (75150 bytes)    aust-dot.jpg (24730 bytes)      

scr-399-inside-sm.jpg (231492 bytes)

This is the goal, to have it all working and it's part way there... 

maybe you can help ..we are ready to buy any parts that are needed .

one of the problems of course is that Australia does not have many if any BC-610

transmitters - and none that appear to be for sale. We are prepared to bring one into

Australia if needed. many of the smaller parts have come in from overseas already .

This is intended to be a restoration that goes out on events,and is used once a year

at a large Military vehicle event, and also for Amateur radio recreation.         

A special 'Ham' radio QSL card will be issued for the first 100 stations to contact this vehcile when restored by Ham radio.

When -  that's a good question ,  - Aprrox late in   2012 if things go well.   We will keep this website up to date,

  Rick S.  Project Owner  ,       & Andrew T. :   Technical Support    Amateur Radio callsign    VK5WT  

Progress Report :   

ITEMS STILL TO FIND:

We  need to find the the main  CABIN  / SHELTER  -below-   ---      photo from original manual .

We do have the antennas, bases  , but do need the HO-17-A Shelter or drawings to make one.

'Down here' in Australia we don't even have a wreck to measure up from, so we're looking to the outside world for help

 

                scr-399-shelter-sm.jpg (862326 bytes)  

And we are looking for a PE95 Generator Also.   PE95.jpg (18140 bytes)  

AND A -52-E GENERATOR TRAILER    .... 

 

and drawings for the Radio chest -  pictured below -  CH-121-A   , and CH-120-A   and we are offering some money for drawings-copy of.  

The chance of finding genuine ones is small, and they could  be made here in Australia

The Heater -  investigating....not sure about the design here yet...

This diagram shows  our interst in drawings - or the real thing -    items blanked out we already have. 

marked-LAYOUT-sm.jpg (132394 bytes)






ITEMS BEING RESTORED:   soon  the BC610 will get a cleanup....soon...

 

 

Speech Amplifier [waiting for work to be done]     speech.jpg (158022 bytes)

                                                                                                                         [  photo from original manual  ]

 

2 x Field Telphones [waiting for work to be done]

ITEMS RESTORED/FINISHED:

   The 6x6 Truck    !!

   BC-342   Receiver        ----   115 VAC

    BC-312 Receiver   [12 V DC ] 

     2 x LS3  Speaker boxes.   

 

 

Email Rick if you would like to sell him one of these parts for the project at: rickshearman@bigpond.com

If you have some technical notes & pictures of the insides of things, please email the tech team support :

Andrew VK5WT  +61  422  574 723     tosty@internode.on.net